Action
Notice of proposed rulemaking (NPRM).
Summary
The FAA proposes to supersede Airworthiness Directive (AD) 2023-09-06, which applies to all CFM International, S.A. Model (CFM) LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, and LEAP-1A35A (LEAP-1A) engines. AD 2023-09-06 requires replacement of certain high-pressure turbine (HPT) rotor stage 1 disks (HPT stage 1 disks), forward outer seals, and compressor rotor stages 6-10 spools. AD 2023-09-06 also prohibits installation of an HPT stage 1 disk, forward outer seal, or compressor rotor stages 6-10 spool that has a part number and serial number identified in the service information onto any engine. Since the FAA issued AD 2023-09-06, the manufacturer identified additional affected parts that were manufactured from material suspected to have reduced material properties due to iron inclusion, which prompted this AD. This proposed AD would retain the requirements to replace certain HPT stage 1 disks, forward outer seals, and compressor rotor stages 6-10 spools and expand the applicability to include additional affected parts manufactured from the same material suspected to have reduced material properties due to iron inclusion. The FAA is proposing this AD to address the unsafe condition on these products.