Action
Final rule.
Summary
The FAA is superseding Airworthiness Directive (AD) 99-01-19 and AD 2004-25-02, which applied to certain Airbus SAS Model A320 series airplanes. AD 99-01-19 and AD 2004-25-02 required repetitive inspections to detect fatigue cracking in certain areas of the fuselage, and corrective action if necessary. AD 2004-25-02 also provided an optional terminating action for the repetitive inspections. This AD continues to require, for certain airplanes, repetitive inspections of the fastener holes for any cracking, and repair if necessary, and provides an optional terminating action for the fastener hole inspections. This AD also revises the applicability to include additional airplanes and requires, for all airplanes, inspections of the emergency exit door structure for any cracking and repair if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a report that during full scale tests to support the Model A320 structure extended service goal (ESG) exercise, several cracks were found on both sides of the overwing emergency exit door cut-outs at fuselage section 15. The FAA is issuing this AD to address the unsafe condition on these products.