Action
Final rule.
Summary
We are superseding Airworthiness Directive (AD) 2017-16-07, which applied to certain Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A340-500, and A340-600 series airplanes; and Model A340-313 airplanes. AD 2017-16-07 required inspection of the fuselage bulk cargo door frames at specific locations, and corrective action if necessary. This AD requires new inspections of certain attachment holes for residual surface treatment and cracking, and corrective action if necessary; and provides an optional terminating action for the inspections. This AD also revises the applicability to add certain airplanes and remove others. This AD was prompted by a determination that only airplanes having certain manufacturer serial numbers (MSNs) are affected by tartaric sulfuric anodizing (TSA)/chromic acid anodizing (CAA) surface treatment in the door fitting attachment holes, and that airplanes having certain MSNs were excluded. This AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. We are issuing this AD to address the unsafe condition on these products.