Action
Final rule.
Summary
We are superseding Airworthiness Directive (AD) 2008-12-04, which applied to certain The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes. AD 2008-12-04 required various repetitive inspections to detect cracks along the chem-milled steps of the fuselage skin, and to detect missing or loose fasteners in the area of a certain preventive modification or repairs; replacement of the time-limited repair with a permanent repair, if applicable; and applicable corrective actions which would end certain repetitive inspections. This AD reduces the post-modification inspection compliance times, limits installation of the preventive modification to airplanes with fewer than 30,000 total flight cycles, and adds repetitive inspections for modified airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) that indicated that the upper skin panel at the chem-milled step above the lap joint is subject to widespread fatigue damage (WFD) if the modification was installed after 30,000 total flight cycles. We are issuing this AD to address the unsafe condition on these products.