Action
Final rule; request for comments.
Summary
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD requires removing the fasteners attaching the machined center fitting to the rear spar frame lower flange splice, inspecting the fasteners and fastener holes for damage, reworking and repairing the fastener holes, as applicable, and replacing the fasteners. This AD was prompted by a report indicating that certain fasteners attaching the machined rear spar center fitting to the frame were installed with a gap between the fastener head and the structure, or were installed tilted. We are issuing this AD to address the unsafe condition on these products.