Action
Notice of proposed rulemaking (NPRM).
Summary
We propose to supersede airworthiness directive (AD) 2009-15- 17, which applied to certain Airbus Model A330-200 and -300; and Model A340-200 and -300 series airplanes. AD 2009-15-17 required an inspection for damage to the protective treatments or any corrosion of all main landing gear (MLG) bogie beams, and application of protective treatments if no damage or corrosion was found. If any damage or corrosion was found, corrective action followed by the application of protective treatments was required. Since we issued AD 2009-15-17, we received reports of thin paint coats and paint degradation on enhanced MLG bogie beams. This proposed AD would add repetitive detailed inspections of the MLG bogie beams. This proposed AD would also require modification of the MLG bogie beams, which would terminate the repetitive inspections for any modified bogie beam. This proposed AD would also provide optional methods of compliance for inspections for corrosion, damage of the protective treatment, repair, and modification, of the MLG bogie beam. This proposed AD would also revise the applicability. We are proposing this AD to detect and correct damage or corrosion of the MLG bogie beams, which could cause a runway excursion event, bogie beam detachment from the airplane, or MLG collapse, which could result in damage to the airplane and injury to the occupants.