Action
Final rule.
Summary
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive detailed inspections for disbonding and tearing and measurements for wear of the internal diameter (ID) of the Karon-lined bushings of the bulkhead support jackscrew fitting and of the jackscrew fitting of the horizontal stabilizer; and reinstallation of the horizontal stabilizer trim actuator (HSTA) after inspection and measurement; and if necessary, replacement of the bushings with new bushings and all applicable related investigative and corrective actions. This AD was prompted by a report indicating that a Karon-lined bushing with the liner broken into five pieces was found during a scheduled inspection of the HSTA components; the broken liner had worn and disbonded from the bushing. We are issuing this AD to detect and correct discrepancies of the HSTA attachment locations, which could result in reduced structural integrity of the horizontal stabilizer and consequent loss of controllability of the airplane.